Important inspections after installation of Manual roof tent

2025-11-29 14:27:15

1. Security check

Shake test: Shake the Manual Roof Tent by hand to check if it is secure and there should be no obvious shaking.

Screw recheck: Recheck all fasteners 24 hours after the Installation of roof tent and before each long-distance trip.

Load test: Stability test can be conducted by applying a weight equivalent to human body weight on the roof of the vehicle before first use.

2. Precautions before driving

Height measurement: Measure the total height of the vehicle after installation to avoid entering height restricted areas.

Wind resistance test: Pay attention to wind noise and stability during the first high-speed driving, and it is recommended not to exceed 80km/h in the initial stage.

Fuel consumption monitoring: After installation, fuel consumption usually increases by 10-15%, which is a normal phenomenon.

3. Key points for long-term maintenance

Regular inspection: Check all fasteners once a month, and strengthen inspections before and after the rainy season.

Cleaning and maintenance: Clean the Manual Side tent tracks quarterly and apply specialized lubricants.

Winter storage: When not in use for a long time, it should be removed and stored to avoid snow accumulation and increased load.